1. the inspection method for the gradient of adjacent plates of special-shaped steel formwork. Generally, the mold steel 4Cr13 is customized and measured with a level and wedge-shaped feeler gauge.

2.钢模板表面平面度检验

2. steel formwork surface flatness inspection

其检验方式是在挑选具备象征性的部位，4cr13模具钢加工用2m直尺和楔形塞尺测量钢模板表面平面度，取较大误差值，读值mm。

The inspection method is to select symbolic parts, use 2m ruler and wedge feeler gauge to measure the flatness of the steel formwork surface for 4Cr13 mold steel processing, take the larger error value, and read the value to mm.

3.钢模板垂直角度检验

3. vertical angle inspection of steel formwork

模板垂直角度检验方式与建筑物(预制构件)垂直角度检验方式同样。可以选用垂直线检验或用水平仪检验，视建筑物(预制构件)模板相对高度和规定的精度采用。

The inspection method of formwork vertical angle is the same as that of building (prefabricated component). Vertical line inspection or level inspection can be selected, depending on the relative height of the building (prefabricated component) formwork and the specified accuracy.

4.模具钢4cr13厂家结构内尺寸检验

4. inspection of internal dimension of die steel 4Cr13 manufacturer

公路桥梁钢模板生产厂家f详细介绍结构内尺寸按照规定检验长、宽、高三个尺寸，以一尺立即量出结果为好，针对基本、墩、台、墙等模内尺寸比较大部位还需查验它的直线之差，各自查验它的上沿和下沿尺寸之差，及其阴阳角一部分状况。

The manufacturer F of steel formwork for highway bridges introduced in detail that the internal dimensions of the structure were inspected in terms of length, width and height according to the regulations. It is better to measure the results immediately with one foot. For the parts with relatively large internal dimensions such as the basic, pier, abutment and wall, it is also necessary to check the difference of their straight lines, and check the difference of their upper and lower edges, as well as part of their internal and external corners.

5.偏移检验。灌溉砼时，先向灌溉四个战争固定不动模板，随后四周按序匀称提高，应该有专职人员用心翻车机，防止蜂窝状、表面和洞。

5. deviation inspection. When irrigating concrete, the four fixed formworks shall be irrigated first, and then the four sides shall be raised in order. Full time personnel shall carefully use the car dumper to prevent honeycomb, surface and dog hole.

悬吊训练镀锌钢丝绳靠残害模板五米处，运用橡胶软管捆扎好，防止炮崩坏三。每片挪动前开展查验，一旦毁坏超限额按照规定好。具备充分的抗压强度、弯曲刚度和可靠性，能靠谱地承担模板施工工艺要求的各类工程施工载荷，并确保形变不超过容许范畴。

The galvanized steel wire rope for suspension training shall be tied with rubber hose at the place five meters away from the damaged formwork to prevent blasting damage. Each piece shall be inspected before moving. Once it is damaged beyond the limit, it shall be solved according to the regulations. It has sufficient compressive strength, bending stiffness and reliability, can reliably bear various engineering construction loads required by the formwork construction process, and ensure that the deformation does not exceed the allowable range.

以上就是为大家介绍的有关山东模具钢https://www.jnqhmj.com的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.

The above is about Shandong die steel https://www.jnqhmj.com I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service